Autonics SPA-050-24 Switching Mode Power Supply, 50W, 24VDC

Description

The Autonics SPA-050-24 is a switching mode Power Supply that can be used to change 100-240V AC input to 24V DC output. It is 2.1 Amp and 50 watts at 24 VDC. This power supply features several circuit protections, including over-current, inrush current, and short circuit. A green LED light indicates the output status. Note: Image is for reference, actual part may differ

Specifications

• Dimensions- 3.82″ Width x 4.72″ Length x 1.57″ Height
• Output Power- 50W
• Output Voltage- 24V DC
• Input Voltage- 100-240V AC
• Input Frequency- 50/60 Hz
• Input Efficiency- Min 80%
• Input Current- Max 1.1 Amps
• Output Current- 2.1 Amps
• Voltage Adjustment Range- +/- 5%
• Input Variation- Max +/- 0.5%
• Load Variation- Max +/- 1%
• Ripple- Max +/- 1%
• Start Up Time- Max 150 milliseconds
• Hold Time- Min 10 milliseconds
• Inrush Current Protection- Max 20 Amps (100VAC)
• Over Current Protection- Min 110%
• Output Short Circuit Protection- Max 5 milliseconds
• Insulation Resistance- Over 100 MOhm
• Dielectric Strength- 3000VAC 5060 Hz for 1 min (between input & output terminals), 1500VAC 50/60 Hz for 1 min (between input terminals & F.G.)
• Vibration- 0.75mm amplitude at frequency of 10 to 55hz (for 1 min) in each X, Y, Z direction for 2 hours
• Shock- 300m/s2 (approx 30G) in each X, Y, Z direction for 3 times
• Electromagnetic Susceptibility- EN61000-6-2
• Electromagnetic Interference- EN61000-6-4
• Safety Standards- EN60950, EN50178
• Ambient Temperature- 14 F to 122 F
• Storage Temperature- -13 F to 149 F
• Ambient Humidity- 25 to 85% Relative Humidity
• Storage Humidity- 25 to 90% Relative Humidity
• Tightening Torque- 0.7 to 0.9 Nm
• Approvals- CE